Forest Pressure Treated Contemporary Double Slatted Fence Panels
Product Description
The 3/4/5/6ft Double Slatted Panel from Forest is a substantial and stylish panel with a contemporary look. It will give a modern feel to boundary fencing and will transform any garden. The panel features slats mounted alternately on the front and back of the panel. With this arrangement the panel offers privacy unlike single-sided slatted panels, whilst still letting some light and air flow through.This makes the panel equally suitable for boundary fencing or for use as screening or partitioning.
The timber is Pressure Treated to give a 15 year Anti-Rot guarantee and the panel can also be used without gravel boards.
The panel is manufactured from FSC certified timber from sustainable sources.
Pack of 3, 4 or 5
Brand Information
Forest Garden Ltd is the UK's leading manufacturer and distributor of garden timber products, primarily garden buildings, fencing, decking and decorative garden structures. Manufactured in the UK using locally sourced timber. Since the late nineties the business has seen many changes through acquisition and organic growth. In 2006 a new management structure integrated a number of operational processes to ensure faster response to market demands - while retaining an absolute commitment to the further development of both the Forest and Larchlap brands. The company now operates two separate divisions, Forest Garden and Forest Sawmills, the latter operating out of two sites with the largest being based in Lockerbie, Scotland and has the largest specialist fencing sawmill in the country. Forest Garden is the manufacturing and distribution arm of the business and is based in Hartlebury, Worcestershire. It proudly boasts the largest manufacturing and distribution sites in its sector from where it delivers weekly to over 3,000 retail outlets in peak season. In addition to that, it also operates an industry leading home delivery service which delivers a staggering 100,000 units per annum.
Conditions of Forest's Guarantee
Dip Treated products must not be installed in direct contact with the ground or into the water.
Dip treated fence panels must be installed with a pressure treated gravel board to isolate it from the ground.
Dip treated products must be retreated every year with a suitable timber preservative.
Dip and Pressure treated products must be installed in line with Forest's assembly instructions.
Pressure treated timber that is cut during assembly or any time after, must be treated with a suitable preservative in order to reseal the timber and protect it from water ingress and fungal attack.
You must retain your proof of purchase in order to claim on the above guarantee.
Material Information
Natural Wood Characteristics:
All natural timber products are unique and will vary in markings, colour and texture, often showing distinctive markings. Sizes are nominal and may vary. Many dimensions are rounded or approximate. The product images shown are as accurate as photographic processes allow and may appear differently in accordance with lighting conditions and screen calibration in addition to the natural variation occurring between individual items. All natural timber products are unique and will vary in markings, colour and texture, often showing distinctive markings. Sizes are nominal and may vary. Many dimensions are rounded or approximate. The product images shown are as accurate as photographic processes allow and may appear differently in accordance with lighting conditions and screen calibration in addition to the natural variation occurring between individual items. Images may not be a true representation of a particular product size or use and may vary in line with manufactuers' changes to specification.
Wood Description:
Wood is a natural material used in a wide range of construction projects and is known for its sturdiness, elasticity, noise reduction qualities and overall aesthtic appeal as a result of its natural characteristics. It will also swell, shrink and crack, release resins, display marrow, gnarls and graining, show inconsistent smoothness and ruggedness, release salts and exhibit pinholes and fungi/ mould.
All of these characteristics are expected with wood and can be explained as follows. Swelling, shrinkage and cracking is caused by the humidity in the atmosphere altering the volume of the wood. Resins escape from the wood usually in the first year following manufacturing. They fall off naturally of may be planed. Marrow, gnarls and grains are unique, natural characteristics of the tree. Rugged areas are where the natural texture of the wood differs and despite milling, cannot be removed. Salts, mould and fungi are caused by the humidity in the atmosphere and are usually a temporary phenomenon. Similary, pressure treated wood often shows markings that may appear to be mould, but are in fact a build up of the treatment applied which may be removed by hand or will gradually weather away. Pinholes are produced by small xylophagous insects. These insects were killed while processing the stem into the end product. Wood, the same as any natural material will never be 'perfect' as the beauty of the material is the variation in colour, texture and finish.
Please ensure all natural wood items are treated with a good quality wood preserver soon after installation to protect the product against weathering.
Dip Treated Softwood
Dip treated wood is basically dipped into a 'bath' of wood treatment for a specific length of time. This means the exterior will be covered, but the treatment will not have penetrated deep into the wood. This type of wood will need treating annually.
Pressure Treated/Tanalised Softwood
Pressure treated wood is placed in a vacuum chamber, which removes all air from the cells in the timber, this forces the preservatives deep into the wood. This process can leave green residue on the wood often mistaken for mould, which will fade over time. You should allow this wood to dry before applying any stain or paint for approx 2 months or more.
Hardwood
Hardwoods are generally stronger and have a high density, making these woods resistant to knocks and scraps. Hardwoods offer more water resistance, meaning they are less likely to rot, suiting them to outdoor furniture.
Specifications
Product Name | Forest_Pressure Treated Contemporary Double Slatted Fence Panels-1.8m width x 1.8m height (pk 3) | Forest_Pressure Treated Contemporary Double Slatted Fence Panels-1.8m width x 0.91m height (pk 3) | Forest_Pressure Treated Contemporary Double Slatted Fence Panels-1.8m width x 0.91m height (pk 4) | Forest_Pressure Treated Contemporary Double Slatted Fence Panels-1.8m width x 0.91m height (pk 5) | Forest_Pressure Treated Contemporary Double Slatted Fence Panels-1.8m width x 1.2m height (pk 3) | Forest_Pressure Treated Contemporary Double Slatted Fence Panels-1.8m width x 1.2m height (pk 4) | Forest_Pressure Treated Contemporary Double Slatted Fence Panels-1.8m width x 1.2m height (pk 5) | Forest_Pressure Treated Contemporary Double Slatted Fence Panels-1.8m width x 1.5m height (pk 3) | Forest_Pressure Treated Contemporary Double Slatted Fence Panels-1.8m width x 1.5m height (pk 4) | Forest_Pressure Treated Contemporary Double Slatted Fence Panels-1.8m width x 1.5m height (pk 5) | Forest_Pressure Treated Contemporary Double Slatted Fence Panels-1.8m width x 1.8m height (pk 4) | Forest_Pressure Treated Contemporary Double Slatted Fence Panels-1.8m width x 1.8m height (pk 5) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
SKU | VENHHM6PK3HD | VENHHM3PK3HD | VENHHM3PK4HD | VENHHM3PK5HD | VENHHM4PK3HD | VENHHM4PK4HD | VENHHM4PK5HD | VENHHM5PK3HD | VENHHM5PK4HD | VENHHM5PK5HD | VENHHM6PK4HD | VENHHM6PK5HD |
Manufacturer | ||||||||||||
Country of Manufacture | ||||||||||||
Pack Contains | ||||||||||||
Pack Coverage | ||||||||||||
Unit Number | ||||||||||||
Colour | ||||||||||||
Brand | Forest | Forest | Forest | Forest | Forest | Forest | Forest | Forest | Forest | Forest | Forest | Forest |
Range | ||||||||||||
Thickness | ||||||||||||
Unit Size | ||||||||||||
Material | Pressure Treated/ Tanalised Softwood | Pressure Treated/ Tanalised Softwood | Pressure Treated/ Tanalised Softwood | Pressure Treated/ Tanalised Softwood | Pressure Treated/ Tanalised Softwood | Pressure Treated/ Tanalised Softwood | Pressure Treated/ Tanalised Softwood | Pressure Treated/ Tanalised Softwood | Pressure Treated/ Tanalised Softwood | Pressure Treated/ Tanalised Softwood | Pressure Treated/ Tanalised Softwood | Pressure Treated/ Tanalised Softwood |
Surface | ||||||||||||
Edge | ||||||||||||
Power Consumption (Watts) | ||||||||||||
Max Flow (Litres) | ||||||||||||
Special Offer | ||||||||||||
Country of Manufacture | ||||||||||||
Delivery Type | Usually up to 14 days | Usually up to 14 days | Usually up to 14 days | Usually up to 14 days | Usually up to 14 days | Usually up to 14 days | Usually up to 14 days | Usually up to 14 days | Usually up to 14 days | Usually up to 14 days | Usually up to 14 days | Usually up to 14 days |
Product Attachments | ||||||||||||
Reviews
