Natural Paving smooth sandstone with a sawn and sandblasted finish for slip resistant qualities. The surface and sides of this paving are sawn for contemporary style garden designs and with a thickness of 50mm is suitable for use on a light usage domestic driveway. This is ideal for matching your driveway paving with your patio to create a seamless continuation across your garden.
Promenade comes in light dove grey shades of sandstone with occasional buff
Colour Variation
Moderately Varied
This paving has a moderate amount of colour and shading variation present within the range
Water Absorbency
Low Absorption
During tests, this paving absorbs less than 1.6% water when fully saturated. The lower the water absorption, the lower the risk of algae growth and staining. By comparison, concrete paving has an average water absorption of 6%
Flexural Strength
Good
During testing, this paving showed flexural strength of 26.1 Mpa. The flexural strength value shows how much bending stress a paving unit can be put under before it breaks and the higher the number, the stronger the paving. By comparison, concrete paving has an average flexural strangth of 5 Mpa
Frost Resistance
Great
During a repeated test cycle of freezing to -40 degrees Fahrenheit, followed by thawing, this paving only lost 0.8 Mpa of flexural strength. This result demonstrates excellent paving resilience
Slip Resistance
Low Risk
This paving has a slip resistance PTV rating of 61 when dry and 51 when wet. A pendulum is used to swing across the stone to determine friction. The rougher the surface, the more the pendulum slows and the higher the value
There are many types of natural stone available, so it is important to choose the right natural stone for you.
All products from Talasey are CE marked to ensure they meet with strict EU regulations that were introduced in 2013. European standards EN1341 (flagstones), EN1342 (pavers) and EN1343 (kerbs) specify the requirements and test methods for each of these. The CE testing covers areas including water absorbency, flexural strength and freeze/thaw resistance.
All natural stone products have been tested to show the various properties of each stone and how it is likely to react under different circumstances.
-
Origin
-
Brand
-
Approved
-
Material
Brand Information
Established in 2005, Natural Paving Products has rapidly become one of the country’s leading suppliers of high quality, ethically sourced natural stone landscaping products. Having gained a reputation for offering the highest quality flags, block paving and other landscaping products coupled with superior sales and customer service support, Natural Paving Products has become synonymous with excellence.
CE Marking and Declarations of Performance
Following an extensive and rigorous testing process in 2013, the complete Natural Paving range of flagstones, block paving, walling and accessories is fully accredited with CE Marking and come with official Declarations of Performance (DOPs). The tests were completed as part of the transition to the new Construction Products Regulation (CPR), which came into force on 1st July 2013 and requires that all products covered by a Harmonised European Standard (hEN) or European Technical Assessment (ETA) carry CE Marking to state their performance characteristics.
Material Information
Natural Stone Characteristics:
All natural stone products are unique and will vary in colour and texture, often showing distinctive markings, minor imperfections and may include mineral deposits such as iron and quartzite. Edges may be handcut or sawn and may include slight irregularities such as chips and blemishes either from the manufacturing process or as part of the natural make up of the stone. Sizes are nominal and may vary. Some paving manufacturers include the pointing allowance in the individual slab sizes whereas others include the pointing allowance in the overall pack coverage. The product images shown are as accurate as photographic processes allow and may appear differently in accordance with lighting conditions and screen calibration in addition to the natural variation occurring between batches. Images may not be a true representation of a particular product size or laying pattern. Descriptions provided offer a combination of the manufacturer's and our own opinion of the product's characteristics and features.
Sandstone Description:
Sandstone is a type of sedimentary rock formed of gritty sand grains and is available in a variety of colours. Sandstone paving is available in a range of different textures, often relying on secondary processing to achieve these finishes.
- Smooth, Sawn Sandstone This sandstone has a level, smooth surface and most often, machine cut edges to give an simple appearance suited to modern, contemporary styles. The surface texture can be smooth to the touch (honed) or have a slightly rough sand-blasted texture to provide non-slip qualities. It is usually also produced in a calibrated thickness where the variation in the thickness of the slab is kept to a minimum to ease laying.
Sandstone Colours:
Sandstone is available in a wide range of colours, some subtle and some vivid. The ranges comprise of a selection of core colours combined with subtle contrasting shades, and the balance of shades can vary between batches of even the same stone due to different seams in the stone quarry occurring over time. The colour intensity increases when the paving is wet. Most brands offer the same range of colours with slightly different names. BE AWARE that not ALL sandstone is the same quality - some unknown brands may not have been tested for suitability in the UK climate and may crack during cold weather.
Please select a product option from the table above to see full specification.
Approved: Each leading brand of paving that we offer is CE marked and can guarantee that their natural stone paving conforms or exceeds British Standards, BS EN 1341-2012. Find out more...CE Marking and Declaration of Performance
Free UK
Finance 
Bulk Discounts 
